Felicity Solar 6kW 48V Dual MPPT Off-Grid Solar Inverter

Felicity Solar 6kW 48V Dual MPPT Off-Grid Solar Inverter

The Felicity Solar IVAM6048P1G1 is a 6kW high-frequency off-grid solar inverter for 48V lithium-ion or lead-acid battery systems. It combines a pure sine-wave inverter, two independent MPPT solar chargers, battery charging, grid or generator input, smart-load functionality and remote monitoring in an IP65-rated enclosure. With up to 9,600W of total PV input power and a 500V maximum PV input voltage, this inverter can support a substantial solar array while the dual MPPT design allows two independently tracked strings. This benefits installations with different roof orientations or solar-array sections, provided each string remains within the applicable voltage and current limits.

6kW Pure Sine-Wave Output

• 6,000VA rated apparent output power
• 6,000W rated output power
• 6,000W maximum continuous AC output
• 12,000W peak output for ten seconds
• 230V nominal AC output
• 26.1A maximum AC output current
• 50Hz or 60Hz rated frequency
• Pure sine-wave output
• Single-phase L + N + PE output

Dual MPPT Solar Input

• Two independent MPPT trackers
• One PV string input per MPPT
• 9,600W maximum combined PV input power
• Up to 6,000W PV access power per tracker
• 500V maximum PV input voltage
• 120V PV start-up voltage
• 90V to 500V PV input-voltage range
• 90V to 425V MPPT operating range
• 300V to 425V full-load MPPT range
• 370V rated PV input voltage
• 20A + 20A maximum operating PV input current
• 27A + 27A maximum PV short-circuit current

The 27A rating applies to the maximum short-circuit current of each MPPT. The manufacturer specifies a maximum operating current of 20A per MPPT. Solar-string voltage, current and cold-weather open-circuit voltage must be verified before connection.

48V Battery System

• Compatible with lithium-ion or lead-acid batteries
• 40V to 60V battery operating range
• 135A maximum battery charging current
• 135A maximum battery discharging current
• Self-adapting lithium-ion charging strategy through compatible BMS communication
• RS485 and CAN communication interfaces

The battery bank, battery-management system, cables, fuses and disconnectors must support the inverter’s voltage and current requirements. Compatibility must be confirmed before installation.

Grid, Generator and Smart-Load Support

• 230V nominal AC input
• 35A grid input current
• 35A generator input current
• Generator connection support
• Configurable smart-load functionality
• 6,000W maximum AC input power available for battery charging

Monitoring and Controls

Built-in Wi-Fi enables supported mobile monitoring through the Felicity Solar application. The inverter includes an LCD and LED display, with RS485 and CAN communication for compatible system components. LAN monitoring is listed as an optional capability.

Protection Features

• IP65 ingress-protection rating
• AC output overvoltage protection
• AC output short-circuit protection
• AC output overcurrent protection
• DC reverse-polarity protection
• Thermal protection
• DC terminal insulation-impedance monitoring
• DC component monitoring
• Ground-fault current monitoring
• Earth-fault detection
• Integrated DC input switch
• Type II DC and Type II AC surge protection
• Optional arc-fault circuit interrupter

Dimensions and Operating Conditions

• Product dimensions: 320 x 432 x 183mm
• Package dimensions: 412 x 532 x 270mm
• Net weight: 13.5kg
• Operating-temperature range: -40°C to +60°C
• Output derating above 45°C
• Intelligent air cooling
• Safety and EMC standards listed by the manufacturer: IEC/EN 61000-6-1/2/3/4 and IEC/EN 62109-1/2

Five-Year Warranty and Installation

The inverter carries a five-year warranty, subject to the manufacturer’s warranty terms and correct installation. Installation, batteries, solar panels, cables and external protection equipment are not included in the product price. The inverter must be installed by a qualified solar installer or electrician. Final suitability depends on the battery configuration, solar-string design, cable sizing, protection equipment, load profile and installation environment.